Description:
This circuit voltage can be from 0 v, output current can be ma from 2 to 3 a continuously adjustable, set the output current, if the experiment circuit exceeds the current (including short circuit), the circuit protection immediately, not cause danger such as burning device, it is elect..
$4.99
Ex Tax:$4.99
How it light:
Feature:
Name: HV-1 high-pressure igniter (DIY kit, you need to assemble it)
Input voltage: DC3-5V
Input current: 3A
Operating current: no less than 2.5A
Working mode: self-excited oscillation boost
Working frequency: about 20KHz
Continuous working time: 10 seconds
Arc ..
$24.99
Ex Tax:$24.99
Specification:Type: Ring TerminialMaterial: BrassColor: GoldenBox Size: Approx. 13*6.5*2.2cmQuantity: 150/300/540pcsMultipurpose electrical connector kit with box.Easy to operate, no soldering kit needed.Provide a safe and durable connection for your electrical wiring.Widely used in rings, hooks, qu..
$3.40
Ex Tax:$3.40
3pcs DC 5V DIY Electronic Windmill Training Kit Speed Adjustable MCU Course Design Set For Soldering
Description:
Working voltage: DC 5V
Work effect: speed can be adjusted
Size: 40 x 50mm
Note: it is not soldering finished product, it is diy kit.
Circuit principle:
The circuit is based on the control of the microcontroller, the microcontroller controls the vertical LED lit..
$10.99
Ex Tax:$10.99
Description:
OPS-1 light control switch has two trigger modes and two output modes:
1). Set trigger mode by JMP1:
Light trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
Dark trigger mode (2-4):..
$10.99
Ex Tax:$10.99
Specification:Material: PolyolefinShrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)Quantity: 580pcsMinimum Shrinkage Temp: ≥84°CFull Shrinkage Temp: ≥120°COperating Temperature: -55°C to +125°CTensile strength: 10.4 MpaDielectric strength: 15 KVCutting method: Scissors or sharp..
$4.99
Ex Tax:$4.99
How it light:
Feature:
Name: HV-1 high-pressure igniter (DIY kit, you need to assemble it)
Input voltage: DC3-5V
Input current: 3A
Operating current: no less than 2.5A
Working mode: self-excited oscillation boost
Working frequency: about 20KHz
Continuous working time: 10 seconds
Arc ..
$15.99
Ex Tax:$15.99
5pcs DC 5V DIY Electronic Windmill Training Kit Speed Adjustable MCU Course Design Set For Soldering
Description:
Working voltage: DC 5V
Work effect: speed can be adjusted
Size: 40 x 50mm
Note: it is not soldering finished product, it is diy kit.
Circuit principle:
The circuit is based on the control of the microcontroller, the microcontroller controls the vertical LED lit..
$13.99
Ex Tax:$13.99
Description:
OPS-1 light control switch has two trigger modes and two output modes:
1). Set trigger mode by JMP1:
Light trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
Dark trigger mode (2-4):..
$14.99
Ex Tax:$14.99
FM Radio TransmitterDescription:1. Model: RF-02FM2. Operating Current: 5-15mA3. Operating Voltage: DC 3-6V4. Transmission Distance: 5-50m5. Transmission Frequency: 88-108MHz6. Audio Input: -15dB (max)7. PCB Size: 53*40mmFM Radio ReceiverDescription:- The YFM-2 type radio circuit is very simple.- The..
$2.99
Ex Tax:$2.99
>>>Manual: Click here to open<<<Note: For the DIY kit, the user needs to have basic electronic knowledge, please check the manual before purchasing to make sure it can be used. Please purchase carefully to avoid unnecessary disputes. Thanks.Description:The weather station uses the ..
$11.99
Ex Tax:$11.99
Features:1. DIY Assembly: This bluetooth speaker kit is perfect for electronics DIY enthusiasts and students to practice soldering skills and learn about circuit assembly.2. Portable Design: With its compact size and lightweight, this bluetooth speaker is easy to carry, making it perfect for both in..
$9.99
Ex Tax:$9.99