eSUN ePLA-Matte 3D Printer Filament 1.75mm 1KG 2.2LBS 3D Printing Filament Matte Surface Low Density Material for 3D Printing - Yellow
- Stock: In Stock
- Model: 1301
$32.12
Ex Tax: $32.12
Performance Parameters:
Melt Flow Index: 2.1 (190°C/2.16KG)
Density: 1.174g/cm³
IZOD Impact Strength: 33.15KJ/m²
Tensile Strength: 34.56Mpa
Elongation at Break: 56.1%
Flexural Strength: 41.21Mpa
Flexural Modulus: 1119.41Mpa
Heat Distortion Temp: 55.1°C
Print the Temperature: 190°C~230°C
Slab Temperature: 45~60°C
Fan Speed: 100%
The Printing Speed: 40-100mm/s
Package Included:
1* ePLA-Matte 1KG 3D Printing Filament
