Specification:
Material: plastic
Color: black
AC: 220V 50Hz
MAX power: 150W
3 levels: low, medium, high, then off
Size: 4.5 x 3.5 x 1.5cm ( L x W x H )
Cable length: about 9cm
Feature:
CE approval
Note: connect the wire correct
The power of lamp can not exceed 60W
The yellow line m..
$2.49
Ex Tax:$2.49
Description: 3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 41 * 60 * 3.4mm (Balanced version) Charging voltage: 12.6V - 13.6V..
$7.99
Ex Tax:$7.99
Description:This camera is compatible with any version of Raspberry Pi.You can adjust it based on the distance.
Features:5 million pixelsOV5647 sensor chipCamera parameters:CCD Size: 1/4 inchAperture (F): 1.8Focal length (Focal Length): 3.6mm (adjustable)Viewing angle (Diagonal): 75.7 degr..
$20.99
Ex Tax:$20.99
Description:
The HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solution in a wide range of common applicati..
$26.99
Ex Tax:$26.99
Description:
B+ connected battery positive;
B1 the connect point between battery 1 and battery 2;
B2 connect the point between battery2 and battery 3;
B3 Connect the point between battery 3 and battery 4;
B- connect to battery negative end;
P- + connection charge / discharge positive;
P- ..
$6.00
Ex Tax:$6.00
3pcs DC 5V DIY Electronic Windmill Training Kit Speed Adjustable MCU Course Design Set For Soldering
Description:
Working voltage: DC 5V
Work effect: speed can be adjusted
Size: 40 x 50mm
Note: it is not soldering finished product, it is diy kit.
Circuit principle:
The circuit is based on the control of the microcontroller, the microcontroller controls the vertical LED lit..
$10.99
Ex Tax:$10.99
Feature:
Input Voltage 3.7V
Output Voltage 14.8V
Package included:
3 x DIY 4 Slot 18650 Battery Holder With 8 Leads
var lazyImages = document.querySelectorAll('img[data-original]');
lazyImages.forEach(function(img) {
img.src = img.getAttribute('..
$4.99
Ex Tax:$4.99
Feature:
Rated voltage: DC 7.4V
Material: ABS polystyrene
Product certification: ROHS
Size: 77.7 X 40.21 X 21.54mm
Package included:
3 x 2 slot 18650 battery holder
var lazyImages = document.querySelectorAll('img[data-original]');
lazyImages.forEach(function(img) {
i..
$3.99
Ex Tax:$3.99
Description:
OPS-1 light control switch has two trigger modes and two output modes:
1). Set trigger mode by JMP1:
Light trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
Dark trigger mode (2-4):..
$10.99
Ex Tax:$10.99
Parameter:
Comprehensive error: 0.05% F.S
Rated output temperature drift: ≤ 0.15% F.S / 10 ℃
Output Sensitivity: 1.0 ± 0.1 mV / V
Zero drift: 0.05% F.S (1 minute)
Zero point temperature drift: 0.2% F.S / 10 ° C
Zero output: ± 0.1 mV / V
Input impedance: 1000 ± 50Ω
Output impedance: 1000 ± 50Ω
Overl..
$15.70
Ex Tax:$15.70
3Pcs Infrared Obstacle Avoidance Sensor For Smart Car Robot Description : The sensor module light is adaptable to the environment, the working voltage of 3.3 V to 5 V. It has a pair of infrared transmitting and receiving tube, when detecting direction meet with obstacles (ref..
$1.99
Ex Tax:$1.99
Specifications:
Color: Green + Red
Diameter: 5mm
Package Type: Diffusion
Voltage: 2.0-2.5v
Current: 10mA
Viewing angle: 150 degree
Wavelength: 571 +644 nm
Luminous intensity (MCD) :20-40; 40-80
Stent type: long-legged
Package Included:
3 x KY-011 Two Color Red and Green LED Mo..
$7.99
Ex Tax:$7.99